Calmer, cleaner care spaces

• 01

  Antibacterial & anti-mould

  99.9% antibacterial rate; grade-0 mould growth after 28 days.

• 02

  Disinfectant ready

  Withstands repeated cleaning and chemical disinfection.

• 03

  Stain proof

  Iodine, potassium permanganate and other medical stains wipe clean.

• 04

  Calming design

  Pleasant colours and textures support patient wellbeing.

Swipe to compare →

Specification notes

Antibacterial hospital walls: how to specify them properly

A hospital wall has to satisfy three audiences at once: the infection-control team, the facilities manager who will clean it for the next twenty years, and the patient who has to live with it for a week. Antibacterial hospital walls work when the specification answers all three, not just the first.

The starting point is the cleaning protocol. Alcohol, chlorine-releasing agents and quaternary ammonium disinfectants are used several times a day in clinical areas, and the surface must survive that regime without losing gloss, cracking or delaminating. Ask for chemical-resistance data against the products the hospital actually uses, rather than a generic claim.

What to look for in the certificate pack

• Antibacterial performance tested to a recognised standard, for example JIS Z 2801, with a stated rate such as 99.9%.
• Mould resistance graded 0 (no visible growth) after a 28-day test — the practical minimum in wet rooms and sluice areas.
• Fire classification for the complete wall build-up, not just the surface film.
• Hazardous-substance testing, for example SGS documentation confirming the film’s composition.

Detailing: where hospital walls actually fail

Contamination and damage concentrate at the boundaries. Joints and seams should be as few as possible, sealed in a specified way, and finished with matching trims rather than improvised sealant. Areas behind beds, around dispensers and beside sockets need details that still allow cleaning. And in corridors, the wall must tolerate trolley and bed impact, which is a question about the substrate rather than the surface: a rigid panel build-up at trolley height, faced with the same film, prevents the localised damage that starts most repairs.

Installation in a working hospital

Refurbishment is rarely scheduled in an empty building. Film and panel systems install dry, produce minimal dust and have no odour, so a ward can be completed section by section and returned to use the same day. B1 fire performance with low smoke and zero-VOC, formaldehyde-free construction are what make that possible within an infection-control plan.

Frequently asked questions

Where can antibacterial film be used? Wards, corridors, consulting and treatment rooms, delivery suites, diagnostic areas and all circulation space. For operating theatres, follow the project’s infection-control specification and confirm the full build-up.

How often does it need replacing? The system is designed for twenty years or more of repeated disinfection, which typically outlasts the refurbishment cycle of the department itself.